TSM Isolated DC-DC converter has 13.8V output with a max of 50 amps (burst at 12V), Dimensions are 8"x5.5" Footprint, 3 lbs

Input Voltage: 36-75V, 72-135V or 110-180V

Input:

Yellow B+

Grey B-

Green B+ (On)

Output:

Red 12V +

Black 12V-

Do not connect black to grey.

Specs:

The ipDCIS series isolated DC-DC converter utilizes advanced high frequency power conversion technology and is designed to transfer high power battery voltage to a lower 12V, to supply vehicle mounted devices such as lights and audio systems. Its features include small size, high efficiency, stabilized output voltage, and completely protected functionality.

This DC-DC converter is completely electrical isolated from input to output to ensure safe use; stabilized output voltage can charge 12V batteries; multiple DC-DC converters can be used in parallel directly to increase output current.

Maximum Efficiency: ≥88%

Environmental Enclosure: IP65

Operating Temperature: -20℃-+60℃

Water & vibration Resistant: Enclosure is sealed by silica glue to protect from water and vibration.

Key Switch Control: The converter can be controlled by a key switch control wire instead of an input relay.

Over Heat Protection: Automatically reduces output current if the temperature is over 65°C, but it does not shut down to ensure the continuous power for your accessories.

Short Circuit Protection: Shuts down and auto-resets with little pulse current.

Under Voltage Protection: Shuts down when the voltage of Hi-V battery is too low to avoid over-discharge of the battery.

Output Voltage: 13.8V±0.2V @0A, >12V @50A

Low Voltage Cutoff

Notes:
(1) Be sure you don't have input wires and output wires reversed, otherwise it will cause damage!
(2) Don't open the shell of the converter; there is a risk of electric shock!

Mechanical drawing

DC-DC Converters

Elcon 500W DC-DC Converter

Elcon 1000W DC-DC Converter - CAN Capable

TSM 600W DC-DC Converter

Elcon 1500W DC-DC Converter - CAN Capable